Serial-to-Bluetooth Interface with Battery
30-day money-back guarantee
Pre-configured & Ready for Action
The AIRcable Serial5 is our, next-generation serial product, designed for optimizing Serial-to-Bluetooth connections. With outside switches you select most baud rate settings as well as hardware handshake. But it is so much more than just a connection device.
The pre-installed cable replacement application, like other applications used in mobile phones, allows zero-configuration use as "service-slave", allowing incoming serial connections from other Bluetooth devices. Through a simple command line interface CLI it configures in a secure one-to-one slave or various master modes, managing connections itself.
Fully Programmable & Configureable
The AIRcable Serial5X is programmed in BASIC and available for you (the customer) to adapt it to your particular application and needs.
The AIRcable Serial5X runs the latest AIRcable OS Operating System that allows complete customization including automatic and selective connections, configuration of PIN code, authentication, name, terminal lines etc. see programming manual. See the open source project for a snapshot of what has already been developed for the AIRcable OS!
The AIRcable Serial5X has external baud rate switches for 4800 - 115200 baud and a hardware handshake disable switch so it can be used in 3 wire serial connection applications. It can perform between 1200 and 460800 baud.
DB9 Male and Female
The AIRcable Serial5X module has a male type DB9 connector. It includes our special null-modem adapter to adapt to a female type connector. This adapter also supports power through pin-9 of the DB9.
In addition the module can be set into 5 different modes which allows it to be independent. Default is the "service-slave" mode, allow any incoming connections with PIN code authentication.
Charging the AIRcable Serial5
The AIRcable Serial5X requires external power (min 5V, max 15V) through the DC jack.
to charge the battery but can also be charged through pin 9 of the DB9 connector (DC 5-15V).
See power plug information.
Every AIRcable Serial5X ships with a free null-modem adapter that is used to convert the male serial plug to a female serial plug, a USB-power plug cable and mini charger for 110V